TWINMATE L-208

Clip on light meter for both incident and reflected light measurement: TWINMATE L-208 The Twinmate L-208 can be mounted on the camera's hot shoe using accessory shoe mounting plate. Compact body and design fit in classic cameras without built-in exposure meter.   Recommended use

Main feature

•	Instant Reading of Aperture/Shutter Combinations with Dial Ring It is possible to read combinations of aperture values and shutter speeds on the dial ring at one view.
•	Shoe Mounting on Camera The accessory shoe is mounted on hot shoe of camera by using shoe mounting plate. (Standard accessory for L-208) The mounting location of the shoe mounting plate is variable and therefore mount it correctly for the camera that you are using.
•	One Hand Operation It is possible to operate with one hand by using the guide needle position retained during 15 seconds after measurement.
• Selection of Reflected or Incident Light Measurement at one touch of a Sliding the Lumisphere You can select reflected or incident light measurement by sliding the lumisphere until it clicks. The light receiving angle for reflected light is 33 degrees (approx. 73mm) corresponds to approx. 70% of angle for 50mm standard lens of 35mm SLR camera (approx. 46 degrees). Make measurements using the fan-shaped lines indicating 33º light receiving angle on the scale plate as a guide.

Main function

How to Use L-208

STEP1 You can select incident or reflected measurement by sliding the lumisphere to the right or left until it clicks.

STEP2 You can set ISO in ISO indicator by rotating ISO switch over knob on the dial ring.

STEP3 Hold meter erect and press measuring button to make a measurement. Release measuring button to complete the measurement after the oscillated guide needle stops.

STEP4 When the button is released, it will retain its position for about 15 seconds. Rotate dial ring during that time, align match needle with the guide needle.You can read combinations of aperture values and shutter speeds on the scale.

Technical Data